CFast 3SE | CFast | Flash Storage - Innodisk Corporation
CFast 3SE
Features

  • SATA III interface
  • Extremely low power consumption
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Hardware write protect
  • Enhanced power cycling management

The Innodisk CFast 3SE operates at SATA III 6.0 Gb/s, which offers data transfer rate of read up to 470MB/sec. and of sequential write up to 250MB/s. Compliant with CFast 2.0 standard, it is designed with 7+17 pin connector and is SATA compatible. Due to the idle power saving, it reduces 30% power consumption. CFast 3SE is featured as small form factor, and suitable for most industrial application.

CFast 3SE can work under harsh environment, and complies with ATA protocol. Without additional drives, the disk can be configured as a boot device or data storage device. CFast 3SE support hardware write protect to prevent modification of valuable data on a device. Besides, through Innodisk's enhanced power cycling technology and more capacitors, CFast 3SE prevents data loss caused by sudden power failure. By using Innodsik's iSMART, users can not only monitor the operation status of SSD, but also visualize Wear-Leveling status with graphics.

Specifications
Model Name
CFast 3SE
Interface
SATA III 6.0 Gb/s
Type
Standard
Flash Type
SLC
Capacity
1GB~64GB
Max. Channels
4
Sequential R/W (MB/sec, max.)
470 / 250
Max. Power Consumption
1W
Thermal Sensor
Optional
H/W Write Protect
Y
S.M.A.R.T.
Y
Dimension (WxLxH/mm)
42.8 x 36.4 x 3.6mm
Vibration
20G@7~2000Hz
Shock
1500G@0.5ms
MTBF
>3 million hours
Storage Temperature
-55°C ~ +95°C
Operation Temperature
Standard Grade: 0°C ~ +70°C;
Industrial Grade: -40°C ~ +85°C