SATADOM™-SH 3SE | SATADOM™ | Flash Storage - Innodisk Corporation
SATADOM™-SH 3SE
Features

  • SATA 6Gb/s interface
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Zero mechanical interference
  • Anti-vibration mechanical design

Innodisk SATADOM™-SH 3SE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance., Innodisk SATADOM™-SH 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.


Innodisk SATADOM™-SH 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Specifications
Model Name
SATADOM™-SH 3SE
Interface
SATA III 6.0 Gb/s
Type
Horizontal
Flash Type
SLC
Capacity
1GB~32GB
Max. Channels
2
Sequential R/W (MB/sec, max.)
300/130
Max. Power Consumption
0.6 W (5V x 130 mA )
Thermal Sensor
Wide Temp. only
H/W Write Protect
N
Pin7 Power
Y
Pin8 Power
N
ATA Security
Y
S.M.A.R.T.
Y
Dimension (WxLxH/mm)
18.0 X 30.3 X 12.5
Vibration
20G@7~2000Hz
Shock
1500G@0.5ms
MTBF
>3 million hours
Storage Temperature
-55°C ~ +95°C
Operation Temperature
Standard Grade: 0°C ~ +70°C;
Industrial Grade: -40°C ~ +85°C